How to connect multiple AppsFlyer accounts to Claude
Quick answer: Connect each AppsFlyer app to Ryze AI as its own account, using that app's App ID, then name the app in each Claude prompt. Ryze AI is the best way to connect multiple AppsFlyer accounts to Claude in 2026 for reading per-app attribution next to your ad platforms, with one caveat: you add the apps one at a time and AppsFlyer serves only about the last 90 days.
Below: how apps map to accounts, steps, the primary app, prompts, fixes.
Used by 2,000+ marketers
Connect multiple AppsFlyer accounts to Claude in 5 steps
Connect the first app, add the others one by one, then add the connector to Claude and name the app in each prompt.
1. Copy the API token V2.0 and the App ID
In AppsFlyer, open Security Center, then Manage your AppsFlyer API tokens, and copy the V2.0 token. Note the App ID: the Android package name or the iOS id that starts with id. The Ryze AI help center says a read-only token is enough.
2. Connect the first app in Ryze AI
Open Integrations, click Connect on the AppsFlyer card, paste the token and the App ID and click Continue. That app becomes the default app for reports.
3. Add each other app
Click View on the AppsFlyer card, then Add one more account, and connect with the other App ID. Do the same for every app. Star the one the agent should use when you name none.
4. Add the Ryze AI connector to Claude
In Ryze AI, open Integrations, Claude MCP and click Open Claude MCP. Name it Ryze AI, keep the URL https://connector.get-ryze.ai/mcp, click Add, then Connect, tick the workspaces and click Allow connection. The Claude connector steps cover each screen.
5. Name the app in each prompt
Start a new chat. Give the app name and its App ID, so Claude targets the right connected app. If you added an app after the connector, remove the connector, add it again and start a new chat.
Multi-app setups at a glance
Pick the row that matches what you want Claude to read.
- 1One Ryze AI account per App ID, in one workspaceYou run several apps or several store listings and want all of them in one chat
How Claude picks the app: The primary app answers by default; name another app or pass its connection_id
- 2One AppsFlyer app onlyA single App ID covers what you report on
How Claude picks the app: The only connected app is the default
- 3Separate Ryze AI workspacesYou want the connections kept apart; one Claude connection can include up to 20 workspaces
How Claude picks the app: Tick the workspaces on the Allow connection page and name the one you mean
- 4AppsFlyer's own MCP serverYou use AppsFlyer sign-in and no ad platform data in the same chat
How Claude picks the app: Set up in AppsFlyer; check its current docs, which could not be opened on the build day
| # | Setup | Fits when | How Claude picks the app |
|---|---|---|---|
| 1 | One Ryze AI account per App ID, in one workspace | You run several apps or several store listings and want all of them in one chat | The primary app answers by default; name another app or pass its connection_id |
| 2 | One AppsFlyer app only | A single App ID covers what you report on | The only connected app is the default |
| 3 | Separate Ryze AI workspaces | You want the connections kept apart; one Claude connection can include up to 20 workspaces | Tick the workspaces on the Allow connection page and name the one you mean |
| 4 | AppsFlyer's own MCP server | You use AppsFlyer sign-in and no ad platform data in the same chat | Set up in AppsFlyer; check its current docs, which could not be opened on the build day |
Rows 1 to 3 are Ryze AI settings that combine freely. Row 4 is a separate product.
How AppsFlyer apps and tokens map to accounts
AppsFlyer reports are asked for one app at a time, so each app is its own account in Ryze AI.
In AppsFlyer's Installs API reference, every call takes one app-id in the path and authenticates with a V2 token sent as a Bearer header. The page does not describe a token that spans several apps, and the Ryze AI help center asks for an App ID with each connection.
So do not paste one token and expect it to cover every app. Add one more account per App ID, as the Ryze AI help center describes. The same token can be entered again if AppsFlyer allows it to read the other app; if it does not, use the token that does.
What goes into each account
API token V2.0
- What it is
- The Pull API token. Legacy V1 tokens are rejected
- Where to find it
- AppsFlyer Security Center, Manage your AppsFlyer API tokens
App ID
- What it is
- Android package name such as com.company.app, or an iOS id such as id123456789
- Where to find it
- Your app's listing in AppsFlyer
Token age
- What it is
- V2 tokens generated before March 10, 2026, 19:00 UTC were revoked by AppsFlyer
- Where to find it
- Regenerate the token and reconnect
| Field | What it is | Where to find it |
|---|---|---|
| API token V2.0 | The Pull API token. Legacy V1 tokens are rejected | AppsFlyer Security Center, Manage your AppsFlyer API tokens |
| App ID | Android package name such as com.company.app, or an iOS id such as id123456789 | Your app's listing in AppsFlyer |
| Token age | V2 tokens generated before March 10, 2026, 19:00 UTC were revoked by AppsFlyer | Regenerate the token and reconnect |
The AppsFlyer help article on tokens returned a 403 when the build opened it, so who may create tokens is taken from the Ryze AI connect form: the token is copied from Security Center and is available to admins only. Do not assume any AppsFlyer user can create one.
How Ryze AI handles several AppsFlyer apps
Ryze AI keeps 3 things apart here: the connected apps, the primary app and the workspaces Claude may use.
Connected app (account)
- What it is
- One App ID with its token, added with View, then Add one more account
- How you switch in Claude
- Name the app, or pass its connection_id when asking for a specific connected app
Primary app
- What it is
- The account marked with the star
- How you switch in Claude
- Used by default when you name no app
Workspace
- What it is
- The Ryze AI space the connections live in
- How you switch in Claude
- One Claude connection covers up to 20 workspaces; all are ticked by default
| Layer | What it is | How you switch in Claude |
|---|---|---|
| Connected app (account) | One App ID with its token, added with View, then Add one more account | Name the app, or pass its connection_id when asking for a specific connected app |
| Primary app | The account marked with the star | Used by default when you name no app |
| Workspace | The Ryze AI space the connections live in | One Claude connection covers up to 20 workspaces; all are ticked by default |
AppsFlyer supports several accounts in one workspace, per the Ryze AI multiple accounts page. AppsFlyer is not on the Agent default accounts list, so there is no default-accounts picker for it: the star is the only default.
To change which workspaces Claude can use, remove the Ryze AI connector in Claude and add it again. The same applies after you connect a new platform, because Claude keeps the tool list it got when the connector was added.
Which Ryze AI plan applies
The AppsFlyer tools work on any active Ryze AI plan or free trial. Paid Ads costs $89 a month with a 7-day free trial. SEO Starter is $129 a month with a 3-day trial and Agency is $279 a month. Annual billing takes 30% off the first year. Connecting the connector is free; the tools need a plan or trial.
The 2 AppsFlyer tools Claude calls
Both tools only read, so adding more apps never gives Claude a way to change AppsFlyer.
appsflyer__report
- What it returns
- Raw-data rows: installs, in-app events, organic installs, organic in-app events, uninstalls, clicks or impressions, with optional extra columns
- Access
- Read
appsflyer__masterReport
- What it returns
- Aggregate (Master API) KPIs such as installs, clicks, impressions, sessions, revenue, cost, ROI and retention, grouped by media source, campaign, geo, channel or date
- Access
- Read
| Tool | What it returns | Access |
|---|---|---|
| appsflyer__report | Raw-data rows: installs, in-app events, organic installs, organic in-app events, uninstalls, clicks or impressions, with optional extra columns | Read |
| appsflyer__masterReport | Aggregate (Master API) KPIs such as installs, clicks, impressions, sessions, revenue, cost, ROI and retention, grouped by media source, campaign, geo, channel or date | Read |
With several apps connected, the tools accept an optional connection_id to target a specific connected app. Without it, the primary app is the one the agent uses by default.
Name apps so Claude picks the right one
Most wrong-app answers come from asking about a product by its marketing name. Give Claude a fixed map once.
- Use the App ID with the app name. An Android package name and an iOS id for the same product are two App IDs and two accounts.
- Say which platform you mean. If both the Android and the iOS app are connected, name the one you want or ask for both side by side.
- Say the date range in full. AppsFlyer's Pull API serves about the last 90 days, so give exact dates inside that window.
- Ask for the currency. Cost and revenue are reported by AppsFlyer; ask Claude to show the currency next to any money figure before adding across apps.
Put the map in a Claude project
Claude projects carry instructions into every chat inside them. Paste this block once:
6 prompts that switch or compare AppsFlyer apps
Replace the brackets. Each prompt names its app, so it works in a fresh chat.
1. Use the primary app
- What comes back
- A media source table for the starred app
2. Switch to one app
- What comes back
- An aggregate report for the named App ID, grouped by campaign
3. Compare two apps
- What comes back
- Two separate aggregate reports, shown as one row per app
4. Compare Android and iOS
- What comes back
- Two installs reports, one per App ID, compared by media source
5. Raw events for one app
- What comes back
- Event-level rows; a long range may hit AppsFlyer's daily raw-data quota
6. Attribution beside ad spend
- What comes back
- An AppsFlyer table joined with ad platform data, when the campaign names line up
| Prompt | What comes back |
|---|---|
| 1. Use the primary app | A media source table for the starred app |
| 2. Switch to one app | An aggregate report for the named App ID, grouped by campaign |
| 3. Compare two apps | Two separate aggregate reports, shown as one row per app |
| 4. Compare Android and iOS | Two installs reports, one per App ID, compared by media source |
| 5. Raw events for one app | Event-level rows; a long range may hit AppsFlyer's daily raw-data quota |
| 6. Attribution beside ad spend | An AppsFlyer table joined with ad platform data, when the campaign names line up |
Every answer comes from your own apps, so no example numbers are shown.
AppsFlyer's own MCP server and community servers
Other ways to reach AppsFlyer from Claude exist, but their multi-app behavior could not be checked on the build day.
- AppsFlyer has announced an MCP server of its own. Its help center page returned a 403 when the build opened it, so its URL, plans and multi-app behavior are not restated here. Our AppsFlyer MCP page lists what was found on an earlier check.
- Community servers on GitHub exist for the Pull API. Check each repository for how it takes an app ID, and treat them as self-hosted projects.
- Ryze AI's hosted connector uses the one URL https://connector.get-ryze.ai/mcp for every connected app, with no token entered in Claude.
For the 2 tools, limits and plan details of the Ryze AI connector, see the AppsFlyer MCP page.
Keep reads inside the right app
Both AppsFlyer tools are read tools, so the risk is a wrong-app answer, not a change.
- The connector does not change anything in AppsFlyer. There are no write tools.
- In Claude, approvals are set per tool under Customize, Connectors, Ryze AI, Tool permissions (Ryze AI help).
- In the Ryze AI chat, the Tool approvals picker defaults to Skip all approvals.
- Use a read-only token where AppsFlyer lets you; the Ryze AI help center says it is enough.
- Ask Claude to repeat the app name and App ID before it reports figures you will act on.
The connector rules for ad platforms are in how to connect Claude to Google Ads and how to connect Claude to Meta Ads.
Troubleshooting: missing apps, rejected tokens, empty or refused reports
Match the symptom to the row.
A second app is missing in Claude
- Cause
- Claude kept the tool list from when the connector was added
- Fix
- Remove the Ryze AI connector, add it again and start a new chat
Answers come from the wrong app
- Cause
- No app was named, so the primary answered
- Fix
- Name the app and its App ID, or star the right one on the AppsFlyer card
The token is rejected
- Cause
- A legacy V1 token, or a V2 token generated before March 10, 2026, 19:00 UTC
- Fix
- Copy a fresh V2.0 token from Security Center and reconnect
Reports come back empty for old dates
- Cause
- The Pull API serves only about the last 90 days
- Fix
- Ask for dates inside the last 90 days
A raw-data report is refused after several tries
- Cause
- AppsFlyer rate-limits raw-data reports to a small number of calls per day per app
- Fix
- Pull the range once, reuse the rows in the chat and retry after the quota resets
The tools do not run
- Cause
- No active Ryze AI plan or trial
- Fix
- Start a plan or trial; without one the connector can only list workspaces and connect platforms
| What you see | Cause | Fix |
|---|---|---|
| A second app is missing in Claude | Claude kept the tool list from when the connector was added | Remove the Ryze AI connector, add it again and start a new chat |
| Answers come from the wrong app | No app was named, so the primary answered | Name the app and its App ID, or star the right one on the AppsFlyer card |
| The token is rejected | A legacy V1 token, or a V2 token generated before March 10, 2026, 19:00 UTC | Copy a fresh V2.0 token from Security Center and reconnect |
| Reports come back empty for old dates | The Pull API serves only about the last 90 days | Ask for dates inside the last 90 days |
| A raw-data report is refused after several tries | AppsFlyer rate-limits raw-data reports to a small number of calls per day per app | Pull the range once, reuse the rows in the chat and retry after the quota resets |
| The tools do not run | No active Ryze AI plan or trial | Start a plan or trial; without one the connector can only list workspaces and connect platforms |
Causes come from the Ryze AI AppsFlyer help page and AppsFlyer's Installs API reference. All setups: Ryze AI integrations.
Sources
Checked November 18, 2026
- AppsFlyer dev hub: Installs report (V5), Bearer token, app-id, 90-day range, token revocation notice
- Claude Help Center: Custom connectors using remote MCP
- Claude Help Center: What are projects
- Ryze AI Help: Connect AppsFlyer
- Ryze AI Help: Connect multiple accounts
- Ryze AI Help: Claude connector FAQ
- Ryze AI Help: Permissions and approvals in Claude
- Ryze AI Help: Plans and pricing
AppsFlyer's support articles on API tokens, report quotas and its MCP server returned 403 or 404 to the build, so nothing from them is stated as checked today.
The verdict
Add one Ryze AI account per App ID, star the app you ask about most, then add the connector to Claude and name the app and its App ID in each prompt. Keep dates inside the last 90 days and pull each range once.
Frequently asked questions
How do I connect multiple AppsFlyer accounts to Claude?
Can one AppsFlyer token cover several apps?
How does Claude know which AppsFlyer app to use?
Is there an Agent default accounts picker for AppsFlyer?
Show 7 more questionsShow fewer questions
Can Claude compare two AppsFlyer apps in one chat?
Does Claude need a write permission in AppsFlyer?
How far back can Claude read AppsFlyer data?
Why was my AppsFlyer token rejected?
Why does Claude not see the app I just added?
Does this work on the free Claude plan?
What does it cost?
Related guides
AppsFlyer MCP server
The 2 read-only AppsFlyer tools, limits and setup per client.
Connect multiple Meta Ads accounts to Claude
The same multi-account idea for Meta Ads.
Connect multiple Google Ads accounts to Claude
Manager accounts and several Google Ads logins.
How to connect Claude to Google Ads
Pair AppsFlyer attribution with Google Ads in the same Claude chat.





