By Ira Bodnar, Ryze AI · Updated · Connector tested November 13, 2026
Quick answer
The main way to connect OpenClaw to Google Business Profile is the Ryze AI connector. Connect the listing in a Ryze AI workspace and save its Location. Then save https://connector.get-ryze.ai/mcp in OpenClaw as a streamable-http server with auth set to oauth, either from Settings > MCP in the Control UI or with openclaw mcp set while the Gateway is stopped, and sign in with openclaw mcp login ryze or the Sign in button on that Settings page. OpenClaw then lists the 14 Business Profile tools.
- In Ryze AI open Integrations, click Connect on Google Business Profile and sign in with the Google account that manages the listing
- Pick the Location this workspace works on and click Save
- Stop the Gateway with openclaw gateway stop and run openclaw mcp set ryze with the connector URL, or add it under Settings > MCP while the Gateway runs
- Run openclaw mcp login ryze, click Allow connection on the Ryze AI page, then start the Gateway again
OpenClaw to Google Business Profile at a glance
| Fact | Detail |
|---|---|
| Main way to connect | The Ryze AI connector, saved in OpenClaw as one remote MCP server named ryze |
| Server address | https://connector.get-ryze.ai/mcp, with transport set to streamable-http |
| Sign-in | OAuth. Run openclaw mcp login ryze while the Gateway is stopped, or have an administrator click Sign in under Settings > MCP. A Ryze AI API key in a bearer header is the other route |
| Business Profile tools | 14 in all: 8 that read and 6 that write. Removing a post counts as a write |
| Can it change the listing | Yes. Replies, posts, photos, attributes and listing fields go public on Search and Maps. OpenClaw's tool policy and a toolFilter on the entry decide which tools the agent gets |
| Whose sign-in the agent uses | One shared, operator-managed sign-in per server by default, so everyone who talks to the agent reaches the same listing |
| Locations | One connection is one location, and every tool works on the Location saved for it |
| OpenClaw plan | None to buy. OpenClaw is MIT licensed and self-hosted, and its docs say there is no paid tier |
| Ryze AI price | SEO Starter, which includes Local SEO, is $129 per month with a 3-day free trial. Paid Ads at $89 per month with a 7-day free trial also runs the 14 tools. Connecting is free |
| Google's own option for OpenClaw | Google lists none: its pages named no Business Profile MCP server for any assistant on November 14, 2026. Its direct route is the Business Profile APIs, closed until Google approves an access request |
| Last tested | The connector's sign-in answer on November 13, 2026, and 11 Business Profile tool calls from Claude Code on November 14, 2026. No step was run inside OpenClaw |
Before you start
- OpenClaw. It is an open-source project under the MIT license that you host yourself, and its docs say it has no paid tier. You need a running Gateway plus one of these: the openclaw command on the Gateway machine, administrator access to the Control UI, or access to the Gateway's openclaw.json file.
- A Google account that owns or manages the listing, ideally a verified one. For an unverified listing Google shares only part of the data: no map coordinates, reviews may not load, and performance and search keywords are not served.
- A Ryze AI workspace on a plan or free trial. Local SEO is part of the SEO plans: SEO Starter is $129 per month with a 3-day free trial. The 14 Business Profile tools also work through the connector on any active plan or free trial, including Paid Ads at $89 per month with a 7-day free trial. Connecting is free; the tools need an active plan or trial.
- A note on testing. Ryze AI has no help-center page for OpenClaw and has not tested the connector there. The steps below follow OpenClaw's own documentation for remote servers that use OAuth, as it read on November 15, 2026.
How to connect OpenClaw to Google Business Profile
Two steps happen in Ryze AI and Google, the rest in OpenClaw. The connector URL is the same for every user.
Connect Google Business Profile in Ryze AI
Create a Ryze AI account or sign in, open Integrations in the left sidebar and find Google Business Profile with the Search integrations box or the Analytics filter. Click Connect, sign in with the Google account that manages the listing and allow access. The Google screen may show the name of a connection partner instead of Ryze AI.
Pick the Location
Back in Ryze AI, pick the Location this workspace works on and click Save. Until a Location is saved the card shows Require setup. One connection is one location, and the tools act on the Location you save here.
Register the connector in OpenClaw
Stop the Gateway first with openclaw gateway stop: since OpenClaw 2026.10.10 (November 3, 2026) the CLI refuses to change saved servers while a Gateway owns the state directory. Then run: openclaw mcp set ryze '{"url":"https://connector.get-ryze.ai/mcp","transport":"streamable-http","auth":"oauth"}'. This stores a server named ryze. You can also put the same entry under mcp.servers in ~/.openclaw/openclaw.json, or add it with Add server under Settings > MCP in the Control UI while the Gateway keeps running.
openclaw gateway stop openclaw mcp set ryze '{"url":"https://connector.get-ryze.ai/mcp","transport":"streamable-http","auth":"oauth"}' openclaw mcp login ryzeSign in from the OpenClaw CLI
With the Gateway still stopped, run: openclaw mcp login ryze. A browser opens on the Ryze AI page. Sign in if asked, choose the workspace that holds your Google Business Profile connection and click Allow connection, then start the Gateway again. An administrator can skip the stop and click Sign in for the ryze server under Settings > MCP instead.
Finish the sign-in on a remote machine if needed
If the browser runs on a different machine from OpenClaw, approve the sign-in there and pass the code you get back to the CLI with the --code option of openclaw mcp login. If the callback address also carries an iss value, pass that exact value with --issuer.
Ask your first question
Once credentials exist, OpenClaw includes the server in the agent runtime. Ask: List my Google reviews that have no reply, with the rating and the review text.
The Ryze AI help center article for Google Business Profile covers the Google side of the connection. OpenClaw's own pages on the MCP registry commands and transports and OAuth cover the OpenClaw side.
Sources: OpenClaw: connect MCP servers, OpenClaw MCP registry commands, OpenClaw transports and OAuth (checked November 15, 2026).
CLI, Control UI, openclaw.json and API key
OpenClaw CLI
openclaw gateway stop
openclaw mcp set ryze '{"url":"https://connector.get-ryze.ai/mcp","transport":"streamable-http","auth":"oauth"}'
openclaw mcp login ryzeThis is the flow in the steps above. set writes the server definition, login runs the OAuth flow and saves the credentials on the Gateway host, and afterwards you start the Gateway again. openclaw mcp add ryze --url https://connector.get-ryze.ai/mcp --transport streamable-http --auth oauth is the flag form of the same entry. openclaw mcp show ryze, openclaw mcp list and openclaw mcp status read the saved entries back and keep working while the Gateway runs.
Control UI: Settings > MCP
On the MCP page of the Control UI (/settings/mcp, with /mcp kept as an alias), choose Add server under Configured servers, name it ryze, pick Streamable HTTP and paste the connector URL. OpenClaw's docs send OAuth settings to the scoped config editor lower on the same page, so set auth: "oauth" there and click Sign in. This route writes through the running Gateway and needs administrator access. Sign in works only when the Control UI is opened on the Gateway's loopback address, its own HTTPS address or its published Tailscale address. In a chat, + > Plugins > Add MCP server saves a server for This session or Everywhere.
openclaw.json
{
mcp: {
servers: {
ryze: {
url: "https://connector.get-ryze.ai/mcp",
transport: "streamable-http",
auth: "oauth",
},
},
},
}Edit ~/.openclaw/openclaw.json, which is JSON5, so comments and trailing commas are fine. OpenClaw's Gateway watches the file and applies the change. Keys it does not know make the Gateway refuse to start, so keep the entry under mcp.servers. To sign in afterwards, stop the Gateway and run openclaw mcp login ryze, or use Sign in under Settings > MCP.
A Ryze AI API key instead of OAuth
ryze: {
url: "https://connector.get-ryze.ai/mcp",
transport: "streamable-http",
headers: { Authorization: "Bearer ${RYZE_API_KEY}" },
}Leave out auth: "oauth" and send the key as a bearer header. This matters because OpenClaw ignores static Authorization headers for a server while auth: "oauth" is on. Keep the key in an environment variable instead of the file; a reference such as ${RYZE_API_KEY} does not trigger the literal-value warning of openclaw doctor when the variable is set.
Transport and timeouts
Remote entries use the transport streamable-http or sse, and OpenClaw falls back to sse when transport is omitted, so always set streamable-http for this URL. The default request timeout is 60 seconds, and listing tools at session start uses 10 seconds when requestTimeoutMs is not set. A review list or a long performance range that runs past the request timeout needs a larger requestTimeoutMs on the server entry.
OpenClaw and MCP: the facts in one table
| Question | Answer from OpenClaw's docs |
|---|---|
| Where a server is added | Settings > MCP > Add server in the Control UI, + > Plugins > Add MCP server in a chat, openclaw mcp add or openclaw mcp set in a terminal, or mcp.servers in ~/.openclaw/openclaw.json |
| Config file | ~/.openclaw/openclaw.json, written in JSON5. The Gateway applies edits by itself, and an unknown key stops it from starting |
| Transports | Stdio for local commands, SSE and Streamable HTTP for addresses. A URL entry without a transport is read as sse. openclaw mcp set and openclaw doctor --fix rewrite type: "http" to transport: "streamable-http" |
| Sign-in | auth: "oauth" on an HTTP entry, then openclaw mcp login with the Gateway stopped (--code when the browser is elsewhere, plus --issuer if the callback carries iss), or Sign in under Settings > MCP for an administrator |
| Whose account | Shared and operator-managed by default. oauth.identity: "per-requester" gives each sender a separate sign-in and needs gateway.publicOrigin set to the Gateway's HTTPS origin |
| Approval | MCP tools follow tool profiles and tool policy: coding and messaging include them, minimal hides them, and tools.deny: ["bundle-mcp"] turns them off. + > Plugins > Tool access denies single tools for one session. Per-call prompts are documented for Codex runs, set with --approval auto, prompt or approve |
| Tool names | The agent sees <server>__<tool>, built from a provider-safe form of the server name. openclaw mcp probe shows the exact names |
| Plan | No paid tier. MIT licensed and self-hosted |
| Where servers are managed | The Control UI MCP page, with on and off per server, a scoped config editor and Save or Save & Publish. In a terminal: list, show, status --verbose, doctor, probe, tools, logout and unset |
| Admin controls | Adding from a chat and signing in from Settings need administrator access. enabled: false keeps an entry but hides its tools, and sandboxed sessions need bundle-mcp in tools.sandbox.tools |
Sources: OpenClaw: connect MCP servers, MCP registry commands, transports and OAuth, MCP config, Gateway configuration, MCP in the Control UI, Control UI chat, tool policy, OpenClaw docs home (checked November 15, 2026).
Other clients
The same URL works in other MCP clients. Google Business Profile is connected once in Ryze AI, so nothing changes on the Google side.
Claude Code
Claude Code registers the same URL with one claude mcp add command. See the Claude Code guide for Google Business Profile.
Codex
Codex uses the same connector URL with its own setup steps.
ChatGPT and Claude
Both take the URL as a custom connector in their settings, with plan limits that differ from OpenClaw's. The Ryze AI agent in either one can also send a one-time link that connects Google Business Profile; the link works once and for 24 hours.
Permissions and access
Five things decide what OpenClaw can reach on your listing.
- Which Google account
- Ryze AI connects through Google sign-in (OAuth) via a connection partner, so the Google screen may show the partner's name. Use the Google account that owns or manages the listing.
- Which location
- One connection is one location. Every tool acts on the Location saved for the connection, so check which one you picked before you ask for changes.
- Verified or not
- A verified listing is needed for full data. In Ryze AI, an unverified listing returns only part of the data.
- Shared sign-in
- By default OpenClaw's OAuth credentials are shared and managed by the operator, so everyone who talks to that agent uses the one Ryze AI sign-in and the one listing behind it. Per-requester sign-in needs oauth.identity set to per-requester and gateway.publicOrigin set to an HTTPS origin.
- Public changes
- Replies, posts, photos and listing edits are public on Search and Maps. Google reviews new photos and listing edits before they show.
What the connection is allowed to do
Two sign-ins stand between OpenClaw and the listing. OpenClaw signs in to the Ryze AI connector, and Ryze AI holds a Google sign-in for the profile. The rows show what each part grants and where the fact was found.
| Part | What it grants | Found in |
|---|---|---|
| OpenClaw to the connector | An OAuth sign-in with PKCE (S256) and the authorization code and refresh token grants. The connector offers two scopes, mcp:read and mcp:write | Connector test, November 13, 2026 |
| The saved credential | One shared, operator-managed sign-in per server unless per-requester OAuth is on, kept in openclaw.sqlite on the Gateway host | OpenClaw transports and OAuth page, November 15, 2026 |
| Workspace and connection | The workspace you allow on the Ryze AI page. A tool call may name a connection_id; left out, the primary connection is used | Connector calls, November 14, 2026 |
| Ryze AI to Google | A Google sign-in through a connection partner, whose name may stand on Google's screen in place of Ryze AI | Ryze AI facts |
| Role on the profile | Owner or manager. Google keeps only adding or removing users and removing the profile for owners, so a manager covers everything the 14 tools do | Google Business Profile Help, November 14, 2026 |
| Google API scope | business.manage is the one current scope of the Business Profile APIs, and the pages read show no read-only scope. Which scope the Ryze AI sign-in requests was not checked | Google's OAuth guide, November 14, 2026 |
| Listing and plan | The one Location saved after sign-in, with full data only when it is verified, on an active Ryze AI plan or trial | Ryze AI facts |
Outside the 14 tools: map rank scans, which are a Ryze AI app feature; questions and answers, because Google ended the My Business Q&A API on November 3, 2025; creating a location, starting verification or adding users; video uploads, because uploadMedia adds photos; alert posts, because createPost takes standard, event and offer while Google's API also has alert; and MESSAGING_CLICKS, a metric Google added on October 14, 2026 that was not among the 11 names getPerformance accepted on November 14, 2026.
Sources: Google OAuth for Business Profile, Google owners and managers, Google API sunset dates (checked November 14, 2026).
Removing access
To cut OpenClaw off, stop the Gateway and run openclaw mcp logout ryze, which deletes the saved credentials and keeps the entry, or openclaw mcp unset ryze, which removes the server entry. enabled: false on the entry hides its tools without deleting anything. To disconnect the listing itself, remove Google Business Profile from Integrations in Ryze AI. Google's OAuth guide adds that the profile owner can revoke the access later, from the Google Account permissions page.
What OpenClaw can do on the listing
The Ryze AI connector exposes 14 Google Business Profile tools: 8 read and 6 write. They act on the one location you saved in the workspace.
| Tool | Type | What it does |
|---|---|---|
| google_business_profile__searchCategories | Read | Looks up Google's category list by a word or a name and returns category IDs in the form the listing update takes. |
| google_business_profile__getLocationDetails | Read | Reads the saved Location: name, hours, special hours, description, website, phone, categories, address and open status, with its place ID, review link, Maps link and whether it is verified. |
| google_business_profile__listReviews | Read | Returns Google reviews with star rating, text and reply status, plus the review total and the average rating. It filters by rating range and by replied or not. |
| google_business_profile__getPerformance | Read | Gives daily Search and Maps figures such as impressions, calls, direction requests, website clicks and bookings, as far as 18 months back. |
| google_business_profile__getSearchKeywords | Read | Gives the search terms that showed the listing, with monthly impressions for each term. |
| google_business_profile__listPosts | Read | Lists the profile's posts, newest first, whether they came through the connector or were made straight on Google. |
| google_business_profile__listMedia | Read | Lists the photos and videos on the listing. |
| google_business_profile__getAttributes | Read | Reads attributes like amenities, services and accepted payment types. |
| google_business_profile__updateLocationDetails | Write | Changes listing fields such as hours, special hours, description, website, phone, categories and open status. Each named field is overwritten as a whole and goes public. |
| google_business_profile__replyToReview | Write | Posts the owner's public answer to a review and overwrites any owner reply already there. |
| google_business_profile__createPost | Write | Publishes a standard, event or offer post now or on a schedule, with one image at most and an optional call-to-action button. |
| google_business_profile__deletePost | Write | Takes a published post down at once, with no undo. Ryze AI classes it as a write tool, not a delete tool. |
| google_business_profile__uploadMedia | Write | Adds a photo from a public URL under a category such as cover, logo, exterior, interior or product. |
| google_business_profile__updateAttributes | Write | Writes new attribute values to the listing on Google. |
Keeping the write tools out of reach
OpenClaw documents per-call approval prompts for Codex runs only. In its built-in runtime, MCP tools follow the same tool profiles and policy as other tools: the coding and messaging profiles include them, minimal hides them, and tools.deny: ["bundle-mcp"] turns them all off. Inside a chat, + > Plugins > Tool access lets you deny single tools for that session. Because the six write tools change a public listing, a toolFilter with an exclude list on the server entry is the standing way to keep them out of reach. Entries take exact names or simple * globs; run openclaw mcp probe ryze first to see the names OpenClaw reports. In the Ryze AI chat itself, listing changes follow its Tool approvals setting, which starts on Skip all approvals.
ryze: {
url: "https://connector.get-ryze.ai/mcp",
transport: "streamable-http",
auth: "oauth",
toolFilter: {
exclude: [
"*updateLocationDetails", "*replyToReview", "*createPost",
"*deletePost", "*uploadMedia", "*updateAttributes",
],
},
}Limits in numbers
| Limit | Figure | Set by |
|---|---|---|
| API quota | 300 queries per minute for each API on Google's limits page, Business Information, Account Management and Performance among them. Google puts that at about 5 requests a second | |
| Before approval | 0 queries per minute until Google approves the project's access request | |
| Too many requests | HTTP 429. Google's sample retries with exponential backoff and jitter from a 1.0 second base, up to 5 times | |
| Edits per listing | 10 per minute per profile, and Google will not raise it | |
| Owner reply | 4,096 bytes at most | |
| Search terms | Refreshed at the start of each month; the new month can take up to 5 days to appear | |
| Old posts | Archived after 6 months unless the post has a date range | |
| Category search | 2 to 80 characters, as the refused calls of November 14, 2026 showed | Ryze AI connector |
| Performance | 11 metric names, up to 18 months back, data 2 to 3 days behind | Ryze AI connector |
| Posts and photos | 1,500 characters and one image per post. Photos JPG or PNG, 10 KB to 5 MB, at least 250x250 px | Ryze AI connector, with the same photo sizes on Google's help page |
| OpenClaw request time | 60 seconds per request, and 10 seconds for the tool list at session start unless requestTimeoutMs is set | OpenClaw |
The Google rows bind any app that calls the Business Profile APIs. None of the test answers carried a quota or rate figure, so this guide cannot say which Google quota the Ryze AI connection draws on.
Sources: Business Profile API limits, prerequisites, review reply reference, Google posts help, Google photo help, Google performance help (checked November 14, 2026); OpenClaw MCP config, OpenClaw: connect MCP servers (checked November 15, 2026).
Business Profile calls through the connector, tested
These are the 11 Business Profile calls sent through the Ryze AI connector on November 14, 2026, from a Claude Code session and not from OpenClaw. Three were genuine category searches. The other eight were built to fail, with a bad argument or a connection_id that does not exist, so no listing data could come back.
| Call | Tool | Result |
|---|---|---|
| Category search: coffee | searchCategories | Worked. 9 categories, among them Coffee shop (categories/gcid:coffee_shop) and Coffee roasters |
| Category search: dentist | searchCategories | Worked. 6 categories, from Dentist to Prosthetics dentist |
| Category search: zzqqxxvv, a word with no match | searchCategories | Worked. An empty list and no error |
| Category search of 1 character | searchCategories | Refused: invalid_arguments, too_small |
| Category search of 92 characters | searchCategories | Refused: invalid_arguments, too_big |
| Attributes for a connection_id that does not exist | getAttributes | Refused: not_connected. Nothing returned |
| Listing read with an invented readMask field and an unknown connection_id | getLocationDetails | Refused: not_connected. Whether the field name gets checked stayed open |
| Reviews with minRating 6 | listReviews | Refused: invalid_arguments, too_big |
| Performance for a metric that does not exist | getPerformance | Refused: invalid_arguments, invalid_value. The message lists the 11 names it accepts |
| Performance from 2020/01/01 | getPerformance | Refused: invalid_arguments, invalid_format |
| Search terms from 2026/08 | getSearchKeywords | Refused: invalid_arguments, invalid_format |
Four of the refused calls also carried an unknown connection_id, yet each came back as an argument error. The connector checks ranges, formats and options before it looks up the connection. No answer carried a quota, rate-limit or cost figure.
First 3 prompts to run
Each answer comes from your own listing, so this page describes what comes back instead of showing sample numbers.
1. A review queue
List my Google reviews with 3 stars or fewer that have no reply, with the rating and the review text.
Tools used: google_business_profile__listReviews
What comes back: The reviews that match the rating and reply-status filters, plus the total review count and average rating. Ask for draft replies in the same conversation and read them before asking OpenClaw to publish.
2. How people find the listing
Show Search and Maps impressions, calls, direction requests and website clicks by day for the last 90 days, then the search keywords that showed the business.
Tools used: google_business_profile__getPerformance, google_business_profile__getSearchKeywords
What comes back: Daily counts for each metric and a keyword list with impressions per month. Performance data arrives 2 to 3 days late, and Google drops keywords below an impression threshold it does not publish.
3. A listing check
Read my listing details and tell me which of hours, special hours, description, website and categories look empty or inconsistent.
Tools used: google_business_profile__getLocationDetails
What comes back: The current listing fields, with verification status and the Maps link. Nothing changes until you ask for an edit.
To change something, ask in plain words, for example a holiday hours update or an offer post. The Ryze AI guide says posts can take 24 to 48 hours to appear and stay visible about 7 days; a post has at most 1,500 characters and one image. Photos must be JPG or PNG between 10 KB and 5 MB and at least 250x250 px. Map rank scanning is a Ryze AI app feature, not a connector tool, so OpenClaw cannot run it.
10 jobs to hand to OpenClaw
Ten jobs to give an OpenClaw agent, each matched to the tool behind it. The default connection here means a Google sign-in by an owner or manager with one saved Location. Of these, only the category search was run for this guide.
| Job | What to ask OpenClaw | Tool | Default connection |
|---|---|---|---|
| Unanswered reviews | Show the reviews with no reply yet, lowest rating first, with the review total and the average. | listReviews | Yes, on a verified listing |
| Answer a review | Publish this reply to the review that came in yesterday. | replyToReview | Yes. It replaces any earlier owner reply |
| Monthly numbers | Give me daily Search and Maps impressions, calls, direction requests and website clicks for last month. | getPerformance | Yes, on a verified listing, 2 to 3 days behind |
| Search terms | Which search terms showed the listing in the last three months, with impressions per month? | getSearchKeywords | Yes, on a verified listing |
| Listing check | Read the hours, special hours, description, categories, phone, website, open status and attributes. | getLocationDetails, getAttributes | Yes |
| Holiday hours | Set special hours for the holiday and leave the regular hours alone. | updateLocationDetails | Yes. Google reviews edits before they show |
| Pick a category | Find the Google category for a specialty bakery and add it as an additional category. | searchCategories, then updateLocationDetails | Yes. The search was tested; the update was not |
| Offer post | Schedule an offer post for Friday with this photo and a call-to-action button. | createPost | Yes. Up to 1,500 characters and one image |
| Post clean-up | List the posts and delete the one about the summer sale. | listPosts, then deletePost | Yes. Deleting cannot be undone |
| New cover photo | List the current photos, then add this image URL as the cover photo. | listMedia, then uploadMedia | Yes. JPG or PNG, 10 KB to 5 MB |
The 14th tool, updateAttributes, changes amenities, services or payment types. Google notes that some attributes can be changed only in certain locations, countries or business categories, so read them with getAttributes first. Three jobs have no tool at all: map rank tracking from 49 spots around the office, which runs in the Ryze AI app; answering questions on the listing, since Google closed the Q&A API on November 3, 2025; and creating a location, starting verification or adding a manager.
3 ways to connect OpenClaw to Google Business Profile
Google's own pages list no Business Profile MCP server, so every way into OpenClaw runs through a third party or through code you write. Three ways fit OpenClaw, going by OpenClaw's docs and each vendor's own pages; none of them was set up inside OpenClaw for this guide. This guide treats the first, the Ryze AI connector, as the main way: the Google side is one sign-in inside Ryze AI, with no Google Cloud project or API application of your own, and the OpenClaw side is one remote entry. Zapier's and Google's pages for the other two were read on November 14, 2026, and nothing from them was installed.
| Way | Runs where | Setup in OpenClaw | What it reaches on the listing | Price |
|---|---|---|---|---|
| Ryze AI connector (the main way) | Hosted by Ryze AI, one address for every user | A streamable-http entry named ryze with auth oauth, from Settings > MCP, openclaw mcp set or openclaw.json, then one sign-in. A Ryze AI API key in a bearer header can stand in for the sign-in | 14 tools for one Location: details, reviews and replies, posts, photos, attributes, performance and search terms | SEO Starter $129 per month with a 3-day free trial, or Paid Ads $89 per month with a 7-day free trial |
| Zapier MCP | Hosted by Zapier | Zapier's quickstart names OpenClaw among its MCP clients. Generate your Zapier MCP address, choose the Business Profile actions, then save that address in OpenClaw as a Streamable HTTP server | 3 actions: Create Post, Create Reply and API Request (Beta). None of the listed actions reads reviews, performance or search terms | Each successful tool call uses 2 tasks of your Zapier plan; failed calls do not count |
| Your own server on Google's Business Profile APIs | Your code, as a local stdio command or a server you host | A command entry or a URL entry under mcp.servers for a server you write. Before that: a Google Cloud project, an approved access request, the seven APIs switched on and an OAuth client ID | Whatever the APIs allow: business information, account management, performance, verifications, lodging, place actions and notifications, plus reviews, posts and media in API v4.9. Quota is 0 queries per minute until approval, then 300 per API, with 10 edits per minute per profile | Google's pages state no price |
Options that do not fit OpenClaw
- A Business Profile MCP server from Google. Google Cloud's list of supported MCP products (last updated November 12, 2026), the google/mcp repository and the Business Profile developer pages name none, and none of them names OpenClaw.
- Composio. A hosted service whose Business Profile toolkit lists 56 tools, among them reviews, review replies, local posts, media, daily metrics, search keyword impressions, location updates and verification. That toolkit page names Claude, ChatGPT and Cursor and links setup pages for ChatGPT, Claude Cowork, Grok Bot, Hermes and Atomic Agent. OpenClaw shows up only in Composio's site menu, so there are no OpenClaw steps for Business Profile; the ChatGPT steps use https://connect.composio.dev/mcp as a Streamable HTTP server. Every connection runs through a Google OAuth app you register in Composio's dashboard, which puts that app's Cloud project under Google's access request. Its price list for connecting apps is free up to 10,000 tool calls a month and $18 per seat a month on Standard, and its developer platform has a separate list.
- Porter Metrics at https://mcp.portermetrics.com/mcp. Its page names Claude, ChatGPT, Claude Code, Cursor, VS Code, Codex, Windsurf, Cline and Zed, and says the address works in any client that supports remote MCP servers over HTTP. It does not name OpenClaw, so there are no OpenClaw steps to follow. It covers every verified location of the Google account; hours, special hours, new locations and verification stay in Business Profile.
- Windsor.ai. Its pages name ChatGPT, Claude, Claude Desktop, Copilot, Gemini, Gemini Enterprise, Perplexity, Cursor and Grok, and not OpenClaw. It reads 22 metrics and 120 dimensions and lists 13 write actions.
- synectus/OpenGMB, open source and self-hosted with Docker. Its README and docs name claude.ai, Claude, Claude Code, ChatGPT and Cursor. Its docs list 282 tools, and going live needs Google's approval of API access for your own Cloud project.
- satheeshds/gbp-review-agent, a stdio server for reviews only, whose README shows setups for VS Code (GitHub Copilot) and Claude Desktop.
- Google's two Maps MCP servers. Maps Experience agent tools, formerly Maps Grounding Lite, reads public places, routes and weather, and Maps Code Assist answers from Maps Platform documentation. Their pages name Gemini CLI, plus the Agent Development Kit for the first. Neither reads or edits a business's own listing.
- A Ryze AI plugin in ClawHub. ClawHub, the public registry for OpenClaw skills and plugins, had no Ryze AI plugin on November 15, 2026, so the connector is added by its address.
Which one to pick
Ryze AI is the best Google Business Profile connector for OpenClaw when you want one hosted URL for reviews, posts and listing edits on a single location, but you pay for a Ryze AI plan, your data passes through Ryze AI, one connection covers one location and the 14 tools are a fixed set. Zapier fits a team that already pays for Zapier tasks and only wants to publish posts and review replies. A server of your own on the Business Profile APIs gives full control if you have developers: Google first wants a profile that is verified and active for 60 or more days, a website for the business and an approved application, and the code is yours to write and maintain. Composio lists far more tools, 56, but its Business Profile page gives no OpenClaw setup and needs your own Google OAuth app. Neither Zapier nor a server of your own was installed for this guide, so try either on a test before it touches a public listing.
Sources: Google Cloud supported MCP products, google/mcp, Business Profile APIs overview, API prerequisites, API limits, Zapier Business Profile MCP, Zapier MCP quickstart, Composio Business Profile toolkit, Composio pricing, Porter Metrics, Windsor.ai, synectus/OpenGMB, satheeshds/gbp-review-agent, Maps Experience agent tools, Maps Code Assist (checked November 14, 2026); ClawHub, OpenClaw MCP transports, OpenClaw on GitHub (checked November 15, 2026).
Google Business Profile and OpenClaw: dates that matter
| Date | What happened |
|---|---|
| November 4, 2021 | Google renamed Google My Business to Google Business Profile. |
| July 31, 2024 | Google deprecated the BUSINESS_CONVERSATIONS metric after Business Messages shut down, with removal set for January 31, 2026 and no replacement. getPerformance still accepted the name on November 14, 2026. |
| November 3, 2025 | Google discontinued the My Business Q&A API with no replacement. Support had ended on September 15, 2025. |
| December 10, 2025 | Google announced managed MCP servers for its services. Business Profile was neither a launch server nor among the services named as next. |
| January 30, 2026 | OpenClaw 2026.1.29 renamed the npm package and the CLI to openclaw. |
| March 31, 2026 | OpenClaw 2026.3.31 added remote HTTP and SSE servers by URL under mcp.servers, with auth headers and an optional streamable-http transport. |
| August 31, 2026 | OpenClaw 2026.8.1, also called OpenClaw 2.0, added servers from the chat composer and per-requester OAuth for shared servers. |
| September 23, 2026 | OpenClaw 2026.9.6 let administrators sign in to MCP connectors from Settings. |
| October 14, 2026 | Google added the MESSAGING_CLICKS metric to the Performance API. It was not among the 11 names getPerformance accepted on November 14, 2026. |
| November 3, 2026 | OpenClaw 2026.10.10 started protecting MCP configuration while the Gateway runs. CLI commands without a live path, openclaw mcp set and login among them, now need the Gateway stopped. |
| November 10, 2026 | OpenClaw 2026.11.3 came out. On November 15, 2026 it was the newest stable release, and its notes list no MCP change. |
| November 12, 2026 | Google Cloud last updated its list of supported MCP products. It has no Business Profile entry. |
Sources: Google's rename post, Performance API change log, API sunset dates, Google Cloud MCP announcement, Google Cloud supported MCP products (checked November 14, 2026); OpenClaw releases, changelog 2026.3.31, changelog 2026.8.1, release 2026.9.6, release 2026.10.10 (checked November 15, 2026).
How this guide was tested
Three dates stand behind this guide. The connector's address was checked on November 13, 2026, the Business Profile tools were called on November 14, 2026, and the OpenClaw steps were compared with OpenClaw's documentation on November 15, 2026. Nothing was run inside OpenClaw.
| What was run | What came back |
|---|---|
| The connector address without a sign-in, November 13, 2026 | HTTP 401 with a WWW-Authenticate header that points to the sign-in details. OpenClaw's docs say a 401 at startup is logged as authentication refused (401); that line was not seen, because OpenClaw was not run. |
| The connector's two discovery files, November 13, 2026 | Both loaded. They name the authorize, token and register endpoints, the authorization code and refresh token grants, PKCE with S256, and the scopes mcp:read and mcp:write. |
| The tool list in a signed-in Claude Code session, November 14, 2026 | All 14 Business Profile tools, 8 read and 6 write, under the names in the tools table. |
| Three category searches, November 14, 2026 | All three worked: 9 categories for coffee, 6 for dentist and an empty list for a made-up word. |
| Eight calls built to fail, November 14, 2026 | All eight were refused before any listing data was read: two length errors, two not_connected answers and four other argument errors. The messages are in the errors table below. |
| A read of all 11 answers for quota and cost figures, November 14, 2026 | None of the 11 answers carried a quota, rate-limit or cost figure. |
Not run for this page: every step inside OpenClaw. No Gateway was installed or started, no server was saved and no sign-in was tried, so openclaw mcp set, openclaw mcp login, Settings > MCP and the openclaw.json entry follow OpenClaw's documentation as it read on November 15, 2026. The tool calls came from Claude Code, which reaches the same connector and the same 14 tools. No call read a real listing or its reviews, posts, photos, attributes, performance or search terms, and none of the 6 write tools was called, because they change a public listing. Zapier and Composio were read on their own pages and not installed.
Errors and fixes
Exact messages from the connector test
The connector sent back these seven messages on November 14, 2026, copied word for word. Argument errors begin with Invalid arguments for and the tool name, such as google_business_profile.listReviews; the table shows the part after that. If one of them turns up in an OpenClaw chat or log, this is what it means.
| Message | Meaning | What to do in OpenClaw |
|---|---|---|
| Integration not connected: google_business_profile | No Google Business Profile connection in the workspace matches that connection_id. | Ask again without a connection_id so the primary connection is used, or connect the profile in Ryze AI and save a Location, then start a new chat. |
| Too small: expected string to have >=2 characters | A category search needs at least 2 characters. | Ask for the category with a full word, such as the trade. |
| Too big: expected string to have <=80 characters | A category search takes 80 characters at most. | Search with one or two words instead of a sentence. |
| Too big: expected number to be <=5 | Star ratings run from 1 to 5. | Ask for a rating range inside 1 to 5. |
| Invalid option: expected one of "BUSINESS_IMPRESSIONS_DESKTOP_MAPS"|"BUSINESS_IMPRESSIONS_DESKTOP_SEARCH"|"BUSINESS_IMPRESSIONS_MOBILE_MAPS"|"BUSINESS_IMPRESSIONS_MOBILE_SEARCH"|"BUSINESS_CONVERSATIONS"|"BUSINESS_DIRECTION_REQUESTS"|"CALL_CLICKS"|"WEBSITE_CLICKS"|"BUSINESS_BOOKINGS"|"BUSINESS_FOOD_ORDERS"|"BUSINESS_FOOD_MENU_CLICKS" | getPerformance knows these 11 metric names and nothing else. | Name the figure in plain words, such as calls or website clicks, and let the agent pick the metric, or leave metrics out to get all of them. |
| Expected YYYY-MM-DD | Dates need year, month and day joined by dashes. | Give the range again, for example 2026-09-01 to 2026-09-30. |
| Expected YYYY-MM | Months need year and month joined by a dash. | Give the months again, for example 2026-07 to 2026-09. |
Other problems
- The Business Profile tools do not appear in OpenClaw
- Until shared credentials exist, OpenClaw leaves the server out of the agent runtime instead of failing the turn. Run openclaw mcp login ryze with the Gateway stopped, then openclaw mcp status or openclaw mcp probe ryze to confirm.
- The server connects but the tool list is empty or times out
- Tool listing at session start uses 10 seconds when requestTimeoutMs is not set. Raise requestTimeoutMs on the server entry. Also confirm transport is streamable-http, because OpenClaw uses sse when it is omitted.
- The sign-in page opens on the wrong machine
- Approve the sign-in in the browser, then pass the code it returns to openclaw mcp login ryze with --code, and the iss value with --issuer if the callback carries one.
- The API key is ignored
- Static Authorization headers are ignored while auth: "oauth" is on. Remove auth for the key route, or remove the header and use OAuth.
- An openclaw mcp command refuses to run
- Since OpenClaw 2026.10.10 (November 3, 2026), set, add, unset, tools, login, logout and probe refuse while a Gateway owns the state directory. Stop the Gateway, run the command and start it again. list, show, status and doctor without --probe still work with the Gateway up. To add the server without a stop, edit openclaw.json, which the Gateway watches, or use Settings > MCP, where an administrator can also sign in.
- The log says authentication refused (401)
- OpenClaw's docs use this line when a Streamable HTTP server rejects startup with HTTP 401, which is how the Ryze AI connector answers before you sign in. Finish the sign-in. The pairing comes from the docs and was not seen in a run.
- Status shows authorization-required, or the server rejects the token with insufficient_scope
- Run openclaw mcp login ryze again with the Gateway stopped. OpenClaw keeps the requested scope and asks for a fresh login instead of repeating a refresh that cannot add scope.
- The Gateway will not start after editing openclaw.json
- Keys the Gateway does not know stop it from starting. OpenClaw's current docs put servers under mcp.servers in ~/.openclaw/openclaw.json, so move a block copied from another format, such as an mcpServers block, into that shape.
- The card in Ryze AI shows Require setup
- Pick the Location and click Save. Until a Location is saved the connection is not ready.
- Reviews, performance or keywords come back empty
- An unverified listing shares only part of the data: reviews may not load, and performance and search keywords are not served. Recent days can also be missing because performance data arrives 2 to 3 days late.
- A post or photo is not showing
- The Ryze AI guide says posts can take 24 to 48 hours to appear. Google gives the same window for photos and videos, and reviews new photos and listing edits before they show.
- The wrong business is connected
- Disconnect it in Ryze AI and connect again, choosing the right Location. One connection is one location.
- The agent says a subscription is required
- The tools need an active Ryze AI plan or free trial. Without one the connector can only list workspaces and connect platforms.
Terms on this page
- Gateway
- OpenClaw's single process on your own machine or server. It reads its server list from openclaw.json and keeps MCP sign-ins in its state directory.
- mcp.servers
- The part of ~/.openclaw/openclaw.json where OpenClaw keeps the MCP servers it connects to.
- Shared credentials
- OpenClaw's default for OAuth: one operator-managed sign-in per server, used by everyone who talks to the agent.
- toolFilter
- A setting on a server entry that keeps (include) or hides (exclude) tools by exact name or by a * pattern.
- Verification
- Google's check that you run the business. Performance data and review access through the API need a verified profile.
- Owner and manager
- The two roles on a profile. A manager can do nearly all an owner can, apart from adding or removing users and removing the profile.
- Category ID
- Google's value for a business category, in the form categories/gcid:coffee_shop. The category search returns it and the listing update takes it.
Sources: OpenClaw Gateway configuration, OpenClaw transports and OAuth, OpenClaw MCP config (checked November 15, 2026); Google performance help, Google owners and managers (checked November 14, 2026).
Frequently asked questions
How do I connect OpenClaw to Google Business Profile?
Connect Google Business Profile in a Ryze AI workspace and save its Location. Then stop the Gateway, run openclaw mcp set ryze with the URL https://connector.get-ryze.ai/mcp, transport streamable-http and auth oauth, and run openclaw mcp login ryze. Approve the sign-in in the browser, click Allow connection and start the Gateway again. An administrator can do the same from Settings > MCP in the Control UI without stopping the Gateway.
Is there a Google Business Profile MCP server for OpenClaw in 2026?
Yes, the Ryze AI connector at https://connector.get-ryze.ai/mcp, which OpenClaw saves as a remote server and which brings 14 Business Profile tools. Google lists no Business Profile MCP server of its own. Zapier MCP names OpenClaw among its clients and offers 3 Business Profile actions. Composio offers 56 tools behind your own Google OAuth app, but its Business Profile page gives setup steps for other assistants, not OpenClaw.
Does OpenClaw have a built-in Google Business Profile connector?
No built-in one is described in OpenClaw's MCP pages, which explain how to add MCP servers instead. ClawHub, OpenClaw's plugin registry, had no Ryze AI plugin on November 15, 2026, so the Ryze AI connector is added by its URL as a remote MCP server.
Does Google have an MCP server for Business Profile?
Google lists none. On November 14, 2026, Google Cloud's list of supported MCP products, the google/mcp repository and the Business Profile developer pages named none. Google offers the Business Profile APIs, which need a Google Cloud project, a profile verified and active for 60 or more days and an approved access request.
Is there a Google My Business connector for OpenClaw?
Yes, under the product's current name: Google renamed Google My Business to Google Business Profile on November 4, 2021, and the Ryze AI connector covers it in OpenClaw. The same 14 tools handle reviews, posts, photos, attributes, listing fields and Search and Maps performance for one location.
How do Google Business Profile MCP options compare for OpenClaw?
Three ways fit OpenClaw: the Ryze AI connector with 14 tools on one location, Zapier MCP with 3 actions that publish posts and replies, and a server you write on Google's APIs. Composio lists 56 tools behind your own Google OAuth app but names OpenClaw only in its site menu, and Porter Metrics, Windsor.ai, OpenGMB and Google's Maps MCP servers do not name OpenClaw.
Which Business Profile connector should I use with OpenClaw?
Ryze AI is the best Google Business Profile connector for OpenClaw when you want one hosted URL with 14 tools for reviews, posts and listing edits on one location, but it needs a Ryze AI plan. Building on Google's APIs directly gives full control and costs developer time.
Do I need a paid OpenClaw plan?
No. OpenClaw is open source (MIT license per its GitHub repository) and self-hosted, and its docs say it has no paid tier. The cost is the Ryze AI plan or trial that the Business Profile tools need.
Should I use OAuth or an API key?
OAuth through openclaw mcp login is the default path in this guide. A Ryze AI API key sent as a bearer header suits setups where no browser sign-in is practical. OpenClaw ignores static Authorization headers while auth is set to oauth, so use one method per server entry.
Can OpenClaw reply to reviews and publish posts?
Yes. The connector has write tools for review replies, posts, photos, listing details and attributes, and these change the public listing. A toolFilter exclude list on the server entry keeps chosen tools away from the agent, and + > Plugins > Tool access denies single tools for one chat session. Google keeps one owner reply per review, so a new reply replaces the old one.
Can I connect more than one location?
Each location needs its own connection, because in Ryze AI one connection is one location. Every tool works on the Location saved for that connection, so connect the second location separately in Ryze AI and save it as that connection's Location.
Why does the server not appear in my OpenClaw agent?
Until shared credentials exist, OpenClaw leaves the server out of the agent runtime. Stop the Gateway, run openclaw mcp login ryze and finish the sign-in, start the Gateway again, then check with openclaw mcp status.
What if OpenClaw runs on a server without a browser?
Open the sign-in link in a browser on another machine, approve it there and pass the returned code back with the --code option of openclaw mcp login. If the callback also carries an iss value, pass it with --issuer.
How much does it cost to connect OpenClaw to Google Business Profile?
Connecting costs nothing, but the 14 tools need an active Ryze AI plan or free trial. SEO Starter is $129 per month with a 3-day free trial and includes Local SEO. Paid Ads is $89 per month with a 7-day free trial. Annual billing takes 30% off the first year.
How do I disconnect Google Business Profile from OpenClaw?
Stop the Gateway and run openclaw mcp logout ryze to drop the credentials, or openclaw mcp unset ryze to remove the server. To disconnect the listing, remove Google Business Profile from Integrations in Ryze AI.